WHY GLASSTEX?

Glasstex Installation & Maintenance Guide

Glasstex is the lightest glass textile on the market, making it exceptionally easy to install. Its user-friendly application helps save both time and labour costs, while also enhancing the work environment for painters.

Easy to Install & Maintain

Save Costs

Simple Repairs

Save Time

Quick Install

Hanging Tips for Painters & Decorators

  • Decorator demonstrating the installation process of Glasstex wallcoverings.

    Step 1

    Prepare the wall by filling any holes or irregularities. Do not use a lining paper before hanging

  • Decorator demonstrating the installation process of Glasstex wallcoverings.

    Step 2

    Roll the adhesive onto the wall using ”GLASSTEX Essential Ready Mixed Adhesive”

  • Close-up of a decorator's hands using a utility knife to cut Glasstex wallpaper, with a metal ruler on a flat surface.

    Step 3

    Cut the fabric in lengths. Measure the height of the wall +10 cm. For pattern matching allow extra fabric

  • Decorator hanging a Glasstex wallcovering roll on a wall.

    Step 4

    Apply the fabric at the ceiling and press down. Make sure that the first length hangs vertically

  • Person peeling a large white sheet of wallpaper off a wall.

    Step 5

    The fabric has trimmed edges, which allows hanging edge to edge

  • A man hanging a light-colored canvas frame on a white wall.

    Step 6

    Press well onto the surface with a plastic spatula or a steel putty knife with rounded corners

  • Decorator demonstrating the installation process of Glasstex wallcoverings.

    Step 7

    Trim neatly at the ceiling and floor using bladed knife and straight edge

  • Decorator demonstrating the installation process of Glasstex wallcoverings.

    Step 8

    Paint the wall when the fabric has dried. Use an angled brush or a small radiator roller along ceiling, floor etc. Then apply the paint with a roller. Two coats of paint are normally enough.

Maintenance & Repairs

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 1

    Cut wallcovering a few inches larger than damaged area. Line up with wallcovering. Tape into position over damaged area.

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 2

    Double cut both the new piece of GLASSTEX and the damaged GLASSTEX to ensure a precise seam when the repair is finished.

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 3

    Remove both the new piece of GLASSTEX and the damaged wallcovering. Note the orientation of the patch so it can be properly installed later.

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 4

    If wall is not badly damaged, repairs may not be needed. Apply adhesive to the area where the wallcovering was removed. If damage is extensive, you may need to repair the area.

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 5

    Place the GLASSTEX patch onto the repair area, and carefully line up the pattern or texture. Firmly brush GLASSTEX into the adhesive. There is no need to roll edges or seams.

  • Decorator demonstrating how to repair/maintain Glasstex wallcoverings.

    Step 6

    Paint the patch with a roller using the same paint that was originally used. The combination of paint and GLASSTEX pattern result in a neat professional patch.